GYSCAP TWIN-START BATTERYLESS BOOSTER (EV, 12V) DC/DC

The GYSCAP TWIN START is the only product on the market capable of starting all types of vehicles: petrol, diesel, hybrid and electric. Using supercapacitor technology with an indefinite service life, it is battery-free and requires no maintenance. It starts internal combustion engines and, using its ‘EV Rescue’ mode, also safely reactivates hybrid and electric vehicles.

A SINGLE DEVICE TO START ALL VEHICLES

WAKES UP BOTH HYBRID AND ELECTRIC VEHICLES
In HEV, PHEV and EV vehicles, the 12 V auxiliary battery powers the onboard control units, which are used in turn to activate the high-voltage system. When the 12 V battery is flat, the vehicle ceases to function entirely.
EV Rescue mode delivers a regulated voltage of 14.0 V (adjustable between 12.0 and 16.0 V) and is limited to 50 A, in order to safely restore power to the 12 V system and enable the vehicle to be restarted

STARTS PETROL AND DIESEL VEHICLES
With its extremely high power output (1,600 A when starting) the TWIN START can jump-start any petrol or diesel vehicle fitted with a 12 V leadacid or LFP lithium battery.
‘SOS’ mode can help you start your vehicle even when the battery is completely flat.

UNBEATABLE PERFORMANCE
Ready to use in no time with ultra-fast charging via a 12 V battery, even when flat.You can also charge it in advance using a cigarette lighter socket or USB port for an even faster response in urgent situations.
Recharges straight after each use, meaning you can use it again almost immediately.
Maintenance-free and always ready-to-go: no internal batteries.
Resistant to extreme temperatures (-40°C to +65°C).(-40°C / +65°C).
Long service life: up to 10,000 cycles without any loss of performance.

MAXIMUM PROTECTION

ECU Memory Protect: the charging process for the booster automatically adapts to the vehicle in order to protect the battery and the data stored in the on-board computers.
Alternator protection: The current draw is limited (50 A max) to protect the alternator and prevent overloading.
Essential protective measures: polarity inversion, short-circuit between the clamps, undervoltage and overvoltage

DESIGNED FOR ON-SITE APPLICATIONS

Reinforced plastic housing.
1.70 m 100% copper cables with 25 mm² cross-section.
Fully insulated brass clamps with curved jaws.
Weighs just 7.2 kg

Datasheet
Manual